PDA

View Full Version : helical radius too small l



bala955
06-26-2009, 11:51 AM
fadal gives me alarm helical radius too small milling truemill

tnik
06-29-2009, 11:38 AM
check the min radius in the truemill operation, and/or the plunge type, you might have to increase the radius a bit for your machine.

Darinbee
06-30-2009, 10:28 AM
3-Axis HSM modules using FIT ARCS is creating circle records with very small arc lengths (.0005-.000005)

With the release of V4, we have found that under certain conditions in the new 3 Axis HSM modules (Pencil Cut, Rest machining, Steep Shallow, 3D Offset) circle records with very small arc lengths (.0005-.000005) are being created by the FIT ARCS functions in these routines. More details can be found here (http://www.camcadtech.com/docs/SURFCAM%20Support%20Bulletin%20-%20HSM%20Arcs%20Mpost%20Update.pdf). -

This was fixed in version 4 SP1.

Darin
CAMcad Technologies, Inc.