PDA

View Full Version : Case Traction Engine



cncfreak
06-05-2003, 06:45 PM
Any one build a case traction engine?

scristelli
06-26-2007, 07:53 PM
hi,
i am currently working on a 3/4" scale. it is a lot of work. so far i have the rear wheels completed and will move on to the front by the end of the week.

steve

ErnieD
06-26-2007, 10:15 PM
Hi,

Are plans available? Approximately how big will this Engine be when completed and how heavy?

ErnieD

scristelli
06-26-2007, 10:40 PM
hi,
the 3/4" has a 5" rear wheel dia. weight will be around 20 pounds when complete.
i found a source for drawings at amazon.uk (only place i found that has books). you may also do a google search. the uk plans where expensive.
another source in the usa is coles power models. they have plans for a case 65, in 1" and 2". 2" can pull you around and very detailed.

try www.steamech.com, they have two sets of plans for steam tractors. another site is www.colespowermodels.com. coles, plans are pricey too. anyone who wants to contact off site can reach me at: missy339@msn.com


steve

mopar92
08-03-2007, 05:59 PM
you can get plans for a

1/4 scale case traction engine from plans are $125.00

Aaron Ternings
250 rd 12
sedan ,KS 67361 ph# 620-346-2235

1/3 scale case traction engine

Reduction engineering
661 60th ave sw
Beulah ,nd 58523

ph 701-873-2316 or wwwreductionengineering@westriv.com

plans are $56.00


and 1/2 scale case traction engine

Loyd Creed
17246 e 2430n rd
Danville Illinois 61834
ph # 217-443-1814

you can get casting , info ect . (not sure if arron still sell casting its to bad, he has some nice kits)

the coles engine is a nice engine my dad has one and we hope to steam it up this year for the fist time . We got it from a guy but he passed away before he could show use how to run it. Check out utube for a real cool 1/4 scale case traction engine. www.utube.com ithink thats right. I bought the coles 2" , arrons 1/4, and 1/3 scale planns all are worth the money. hope this helps.

mike



Mike

scristelli
08-03-2007, 11:16 PM
tks mike. that helps a lot.
steve

jayceetrains
06-03-2010, 05:19 AM
I am looking for a set of 1" scale Case Steam engine plans to replace a set I lost.
Can anyone help?