PDA

View Full Version : 2 questions??



Rooney
05-14-2009, 09:27 AM
I finished getting AC to my control box last night. When plugged in, should the power supply fan be on? Or is it on a thermostat?

Question #2...I have the C10 BOB and I unhooked the jumper wire from the 5V to EN replacing it with a switch. With the switch in the on or off position, the light on the board is still lit up. Does the light mean that the board is enabled? Or does it just mean that it has power and can be enabled.
An easier way to ask that question, I guess, would be...Is the light on whether the board is enabled or not?

Thanks,

Rooney

Rooney
05-24-2009, 10:18 PM
I figured someone knew this?

jalessi
05-24-2009, 10:57 PM
Rooney,

The LED on the C10 remains lit as long as your computer is on even if the power to the C10 is turned off.

If you have a Meanwell power supply the fan is on a thermostat.

Jeff...

Rooney
05-26-2009, 09:53 AM
Thank You, Jalessi!