PDA

View Full Version : I might be shafted



senor J.
01-08-2005, 05:10 PM
hello All Im trying to hook up a planetary gear box to a servo motor. the problem is the input shaft of the gearbox is 3/8 and the servo shaft is only 1/4. My questions is, is there some where you can purchase sleevs that would bring a 1/4 up to a 3/8. The whole set up is going to be used for a 4th axis.
thanks

ger21
01-08-2005, 05:13 PM
Mcmaster.com