PDA

View Full Version : Perske 2hp rebuild



daisydog
03-01-2009, 01:52 AM
Hi, I have a Perske that probably needs a rebuilt motor and rebuilt bearings. A vfd single phase 230 in to 3 phase 230 out is also needed.

Anyone no of a good rebuilder or a used replacement in good condition.

Thanks,

Ddog

ger21
03-01-2009, 07:29 AM
You can pick up a water cooled chinese 3HP spindle on Ebay, with VFD, for less than you're rebuild would cost.

http://cgi.ebay.com/2-spindle-motors-and-2-VFD-inverters-as-conbined-order_W0QQitemZ250380153888QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item250380153888&_trksid=p3911.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50