PDA

View Full Version : Pictures and dimensions of IH CNC mill



bucky898
02-26-2009, 08:34 AM
I'm considering buying an IH CNC mill. I'd like to see hi-res pictures of the mill from the front, side, etc. I also need dimensions of the workspace needed to site the mill. I can't find any of this on the IH website. Does anyone have this info handy?

EvanVH
02-26-2009, 10:53 AM
If it is not on the web site call Gene or Tommy. They will give you all of the info you need. :)




Evan

Runner4404spd
02-26-2009, 09:37 PM
the foot pring required to operate an IH mill is about 8x6. yes that 8 feet wide, by 6 feet front to back. i know it seems excessive but once you cnc something you don't want little things getting in the way of that foot print and the travel thats there.

Cruiser
02-26-2009, 10:50 PM
Bucky, Run a search within this thread and you'll find some examples from last yr or so which will tell and show pretty much what will be needed for flood coolant and cnc use !