PDA

View Full Version : Tree vmc1050 pull studs



rbpower
02-21-2009, 06:09 PM
does anyone know which pull studs the Tree 1050 uses?

panaceabea
02-25-2009, 07:17 PM
anybody have any thoughts on this one? are all the tree pull studs the same?

Here is the drawing of the pull stud this fellow needs, just need a source or part number he can google.

http://www.thompsonmachine.net/img/misc/1050.jpg

Michael M
02-28-2009, 01:04 PM
That isn't the same as the one in my 325, which is a PS475

http://www.maritool.com/Retention-Knobs-CAT40-pull-studs/c67_68/p361/Pull-Stud-11122/product_info.html

is the one the 325 uses and MariTool has drawings with each of the studs that may be easier to see than the MSC catalog:

http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=1584

as well as mentioning some of the part numbers used by different manufacturers. But MSC shows information for a lot more studs.

cheers,
Michael

zpsbob
03-06-2009, 12:31 PM
Not the same stud as 325 for 1050, unless machine has CTS

760/840/1050/early1060 stud PT532-45
1050/late 1060 stud, CTS PT475

Bob