PDA

View Full Version : My new Plasma Cutter



Grobschmied
02-14-2009, 08:46 AM
Hello Im from Germany,
This my new selfmade Plasmacutter,
X900mm , Y1200mm , Z150mm

Mick40
02-14-2009, 09:57 AM
Have you cut with it? Could you detial the motors and construction?

Thanks for sharing!
Mick

Grobschmied
02-14-2009, 10:28 AM
hello, my english is not the best, :) the konstruktion is steel 60x50mmx3
the motors are 4A 3NM no i dont have cut with the cutter, i have by the plasma cutter yesterday 80A machine torch, it is my 3. Machine

Grobschmied
02-14-2009, 10:49 AM
this is one video of my last Cutter ..
http://www.myvideo.de/watch/5725319/Plasmaschneidanlage_CNC_Fraese..

Mongkol
02-14-2009, 12:19 PM
Hi Grobschmied,
Look like you don't have THC to control. what software do you use?

Mongkol

Grobschmied
02-14-2009, 01:02 PM
hello, i dont have THC, i dont need this, i have winpcnc econemy thats a german Programm