PDA

View Full Version : Got Movies?



cncmadman
12-12-2004, 10:11 AM
Where's everyones home cnc videos? I have a few if anyone else is interested.

Hack
12-12-2004, 11:03 AM
Always interested in movies!!!

Please post them or email them!!!

Dan

BobLWeiss
12-12-2004, 01:29 PM
Always could use them to convince my wife that its money well spent... :cheers:

jonbrown34
12-12-2004, 02:50 PM
Love to see them, Please email them.
Many thanks,
John

cncmadman
12-12-2004, 07:56 PM
They are pretty large files 60 meg or so I will give it shot though

Scott_bob
12-12-2004, 08:27 PM
If only the video section worked...

A lot of us would upload some good material if we could.
You know what they say "a picture is worth a thousand words", I say a video is 2 thousand.

http://www.cnczone.com/forums/showpost.php?p=56484&postcount=8

best regards,

cncmadman
12-12-2004, 08:40 PM
Well that explains it I have been trying the upload thing for 45 minutes. Well I will try to find another way.

cncadmin
12-12-2004, 09:38 PM
If only the video section worked...

A lot of us would upload some good material if we could.
You know what they say "a picture is worth a thousand words", I say a video is 2 thousand.

http://www.cnczone.com/forums/showpost.php?p=56484&postcount=8

best regards,

You can upload movies to the photo gallery.

cncmadman
12-12-2004, 09:45 PM
120k file limit though or that doesn't matter?

cncmadman
12-12-2004, 10:01 PM
Ok here's the best I can do for now. The video has been compressed from 20meg to 5 so it sucks but you can still see what is going on.

Project is a heart clock yeah I know go ahead and laugh but the ladies love it! hey I didn't get my wife to agree to pay for this stuff very easy!!! Material is black walnut, router is wide open at 30k or so @ 85 IPM as fast as the double sided carpet tape will let me go without slinging it at me! The round pocket is for the clock all other pockets are stepped for stained glass which is also cut on the CNC.

Well here's the link

http://us.f1f.yahoofs.com/bc/2c28b154/bc/movies/router1.wmv?bfeeQvBBVL8UuVOg


i hope it works

Thanks guys

trubleshtr
12-12-2004, 10:12 PM
cncmadman...
very nice, looks like your keyboard eats alot of saw dust. how long did it take you to write the program??

cncmadman
12-12-2004, 10:23 PM
I am CNC machinist by day so the program wasnt too difficult after you get the first perimeters done just step down and send it back.
I only used comp on the circle pocket to hold size, yeah call me hard headed!!!

Yup the keyboard and mouse was right there next to the CNC, have limited space in the home shop but the CNC has since been moved and bolted to a piece of granite plate and half way been realigned.


I am lazy at the home shop

jonbrown34
12-13-2004, 11:56 AM
Sorry, my email link was disabled. I've enabled it now.
John

buscht
12-13-2004, 03:44 PM
Here are some threads that have decent movie links

http://www.cnczone.com/forums/showthread.php?t=171&highlight=MOVIE
http://jfettig.wc101.com/cnc/flood.MOV
http://www.cnczone.com/forums/showthread.php?t=3201

It would be nice to have them all in one place!

Tell us more about cutting stained glass on a CNC. This is on my to do list, I was going to attach an XY table to a scroll cutting band saw and see what happens. But its about 2 years out on my list of priorities.

Thanks

cncmadman
12-13-2004, 04:01 PM
For cutting the stained glass I just take one of the many broken 1/32" endmills I have and grind it into a engraving cutter and etch the glass around .02-.03" deep and break with pliers. It doesn't work every time but it works OK. Go slow and steady

cncadmin
12-14-2004, 12:59 AM
OK lets upload all videos to this directory- http://www.cnczone.com/modules.php?name=Downloads&file=viewcategory&cid=14