PDA

View Full Version : Ballscrew upgrade for Taig Mill?????



Philip
11-30-2004, 10:54 PM
Hello everyone,

Wondering if there is any company or anyone out there who sells a ballscrew upgrade for the Taig CNC mill. Any help would be most appreciated.

Thanks,
Phil

JRouche
12-01-2004, 11:08 AM
Not a direct bolt in but several folks have used ballscrews and nuts from mcmaster carr. Go to their page and in the find products section just type in ballscrew. JRouche

http://www.mcmaster.com/