PDA

View Full Version : Need Help! deckel maho dmu 50 t



gunz
01-09-2009, 10:21 AM
:confused:Hi everybody i'm new member and i would like to receive some help, first of all I need to comunicate a deckel maho dmu 50 t with a computer but i don't know if a need a special software or something. I'll appreciate if somebody could explain me the process. Thanks everybody:wave:

roadrunner3
09-01-2009, 10:04 AM
Hi Gunz,
If you could tell me what operating system you are running i.e heidenhain then i may be able to help.
regards steve.

gunz
09-25-2009, 09:00 AM
Hello Steve i'd really appreciate if you can help me...... the operating system we have is the Heidenhain one, i'm not sure neither the wire's configuration nor the hole process for doing so ja thanks a lot

roadrunner3
09-25-2009, 09:56 AM
Hi Gunz,
if i'm understanding you correctly you want to connect your machine to a pc! and you have Heidenhain control is that correct. Ok if this is correct then you need to go to the Heidenhain website and download TNCremo which you install on your PC then it will allow you to upload and download.
I hope this a help to you, good luck
Steve

gunz
09-28-2009, 11:50 AM
Thanks a lot Steve I have already downloaded the software and I hope to have some free time this week for checking the connection. One last thing ...... I have been looking for an electronic manual of a Deckel DC 30 machine but I haven't gotten it ..... Do you know if there is one?

jarry09
03-10-2010, 11:32 PM
Nice, post, keep up the good work

Shelbena
03-11-2010, 03:00 AM
Nice post, keep up the good work

Shelbena
03-11-2010, 04:09 AM
Nice post, keep up the good work

el_cnc
12-01-2010, 02:17 PM
Gunz can u send me manual for DMU 50 T? plz

imadnangulzar
06-15-2012, 01:48 AM
Dear Concern Person,

We have a machine name is DECKEL MAHO DMC 63V
TNC 426/430
HEIDENHAIN
NC: SOFTWARE
280475 16
The problem is that our machine hard disk is dead and not working due to media card problem also our backup is crash and not repairable. We need software in above mentioned machine so that we can buy other hard drive and install it so that our machine will work smoothly.

Your prompt reply is required in this regard.

My email address is: gulzar.adnan@gmail.com


Thanks,
Adnan Gulzar

nximran
03-24-2014, 09:59 AM
hello everyone .
Can any one help me to give me "deckel maho DMU 50ß T " control post porocesor.
please help me .
thanks .