PDA

View Full Version : Need Help! OSP 700L DELETE PROGRAMS



flywkr
12-31-2008, 05:38 PM
JUST PURCHASED A USED LB10M. CAN'T SEEM TO FIGURE OUT HOW TO DELETE PROGRAMS...

ALSO, HAS ANYONE HAD PROBLEMS WITH COMMUNICATION? I CAN SEND PGMS TO THE DESKTOP, BUT NOT FROM THE DESKTOP TO THE MACHINE...

phx
01-01-2009, 06:50 AM
JUST PURCHASED A USED LB10M. CAN'T SEEM TO FIGURE OUT HOW TO DELETE PROGRAMS...

ALSO, HAS ANYONE HAD PROBLEMS WITH COMMUNICATION? I CAN SEND PGMS TO THE DESKTOP, BUT NOT FROM THE DESKTOP TO THE MACHINE...

edit, Delete Prog-Name, if it is protectet, use it with ;c
u have no Disk Drive?

Goldorak
01-12-2009, 07:38 AM
JUST PURCHASED A USED LB10M. CAN'T SEEM TO FIGURE OUT HOW TO DELETE PROGRAMS...

ALSO, HAS ANYONE HAD PROBLEMS WITH COMMUNICATION? I CAN SEND PGMS TO THE DESKTOP, BUT NOT FROM THE DESKTOP TO THE MACHINE...

for deleting , edit>delete *>write - this should delete all programs one by one

or

edit>init>write -delete all programs in one shot


for the transfer , br sure that your file got th $progname.min% at the start and the % at the end and every character got to be in CAPS, the osp700 dont support small character

on the controller . edit>PIP>read>write or edit>PIP>readTT>write

hope this works for you, data transfert is a bit tricky on okuma controler

broby
01-13-2009, 05:58 AM
If you use DELETE * you will delete all programs WITHOUT confirmation.
If you use DELETE *;V you will get the Delete Confirm message for each file.

Goldorak
01-13-2009, 06:59 AM
If you use DELETE * you will delete all programs WITHOUT confirmation.
If you use DELETE *;V you will get the Delete Confirm message for each file.

not on the osp700L , delete * and the machine will ask you "delete progname.min Y/N" at each program

broby
01-13-2009, 04:20 PM
Ah, We have a couple of OSP7000 controllers and I thought that it was still applicable, however, always willing to concede that it may be different on the OSP700.
If not, wel you you now have the method I have used to get the machine to confirm the delete or not.