PDA

View Full Version : NCPlot v2.06 beta 6 now available



MetLHead
12-13-2008, 08:43 PM
Arrgh... I found a pretty serious bug so it looks like we will have one more beta version.

www.ncplot.com

Only two changes were made for this version:

Fixed a bug in the subprogram search routine that was introduced in the last beta.

The help file has been updated with all the current changes.

Thanks,
Scott

TURNER
12-19-2008, 05:21 AM
Hi Scott,
May have found another bug that wasnt there previously. I am running the beta version 2.6.0.38 and have found through the Calc menu the Measure function is now not working.
Thanks
Keith.

MetLHead
12-19-2008, 07:21 AM
Keith,

You're right, thanks for reporting this.

Scott

deanrach
12-27-2008, 10:11 PM
Scott,

Any plans on developing a toolbar (terminology) to allow users to develop a tool list and/or setup sheet from the G&M code file?

MetLHead
12-27-2008, 10:31 PM
The run time estimation report is the closest thing to this right now. If you open the run time estimation window "Tools / Run Time Estimation" then click "Generate Report" this gives you a machining time estimation per tool.

What other information do you think should be on this report?

Thanks,
Scott

deanrach
12-28-2008, 01:20 PM
The ability to generate a setup sheet. See the attached example.

MetLHead
12-29-2008, 11:02 AM
Does this tooling information get extracted from the program? Do you have a sample program with this information in it?

Thanks,
Scott

deanrach
01-11-2009, 10:05 AM
Scott,

Here's the sample you requested.

MetLHead
01-12-2009, 04:18 PM
Thanks for the sample program! I've got this feature request on the list now, so I'll be taking a look at it.

Thanks,
Scott