PDA

View Full Version : Need Help! connecting turntable



pedroenrique
11-30-2008, 06:17 PM
DEAR SIRS,
I NEED TO ASK YOU SOME QUESTIONS, PLEASE IF IT POSSIBLE ASK ME ONE BY ONE:

I WANT TO USE MY HOT WIRE MACHINE WITH TURN TABLE. I AM USING IT WITH DESKCNC SOFTWARE. IT MEANS THAT WE CAN WORK WITH 4 AXIS INDEPENDIENT. MY MACHINE IS LIKE THE PHOTO, I DID IT BY MY SELF.
I ALWAYS USE EPS FOAM TO MAKE DIFFERENT PIECES.

QUESTION:
I HAVE TURNTABLE TOO . IT USE NEMA 23 . 80 ONZ/PLUG TORQUE 1.3 AMP

HOW CAN I CONNECTED THE TURN TABLE? IF I HAVE 2 OUTPUTS FOR THE X AXIS MOTORS AND 2 OUTPUTS FOR THE Y AXIS MOTORS TO WORK LIKE INDEPENDIENT TO CUT CIRCLES, CONES , ETC….IN EPS FOAM??????
THE DESK CNC PROGRAM HAS X,Y,Z,A AXIS.
I HAVE UN IDEA BUT I DO NOT KHOW IF IS RIGHT: JOIN 2 STEPPER MOTORS(2 MOTORS IN PARALLEL) TO THE Y AXIS AND CONNECTED BOTH MOTORS TO ONE OUTPUT????
CONNECTED THE 2 MOTORS TO THE OUTPUT FOR THE X AXIS
AND CONNETED THE TURN TABLE TO THE OTHER OUTPUT (A AXIS)?

I HAVE THE LATHE TOO, IT USE NEMA 23 . 80 ONZ/PLUG TORQUE 1.3 AMP, I THINK IS THE SAME QUESTION. HOW CAN I CONNECTED THE LATHE TO WILL USE IN MY MACHINE FOR CUT EPS FOAM?

THANk YOU FOR YOU POSSIBLE ANSWER,

REGARDS

PEDRO GAFFARO
pedrogaffaro@cantv.net