PDA

View Full Version : Anti- Backlash do i need or can I make it !!



craftech
10-25-2004, 05:50 PM
Hey guys looking arround for a 3 anti backlash nuts with flanges or is this something i can make fo my 1/2-10 ACME screws 36 inches of travel
Thanks

Bubba
10-25-2004, 07:08 PM
craftech
I have seen several urls that contain flange mounted antibacklash nuts, and yes you can make them (there have been several threads lately on the zone) and YES you do need them if you want repeatability! (Don't ask me how I know:(

Bubba

craftech
10-25-2004, 11:04 PM
Hey thanks BuBba i will see if i can find them ready made OK

The Wizard
10-26-2004, 07:50 PM
I made mine but you could check out the following links for commercially made ones.

http://www.hsimotors.com/PDF/antibacklash_for_external.pdf

http://www.nookind.com/Acme/AcmeTabNut.cfm

http://www.antibacklashnut.com/

http://www.wmberg.com/article970324.html

http://www.techno-isel.com/tic/quote/Acme_A.htm

http://www.kerkmotion.com/products.html

HTH

Larry

craftech
10-26-2004, 11:44 PM
hey thanks wisard i will sure look this up OK