PDA

View Full Version : SHERLINE rotary table



ACME
10-25-2004, 04:43 AM
hello,
anyone know what is a TPI no. for Sherline rotary table?

or

what is a .INI No. for Turbocnc(Sherline rotary table)?
1)Step per rev:_
2)Pitch of screw:_
3)Microstepping:_
4)Reduction:_

thanks

:drowning:

fpworks
11-16-2004, 11:15 PM
here's a small piece for your puzzle:

1 revolution of input shaft = 5 degrees on the table