PDA

View Full Version : Need msi servo drive board



1933ford
10-05-2008, 10:00 PM
Does anyone have a msi servo drive board. I need one for millennium
3100 cnc.

Thanks

tenmetalman
10-06-2008, 09:27 PM
1933ford,
whats the part number on the board, I may be able to help you
tenmetalman

1933ford
10-06-2008, 11:22 PM
tenmetalman
My board is a/w 5001 rev a. The millineium 3100 was built in the early 90's

Thanks

1933ford
10-07-2008, 12:22 PM
tenmetalman,

This is the other number for the msi board. 5001C-119A ,sorry for the mistake. I can also send a pic.

Thanks

tenmetalman
10-07-2008, 09:22 PM
1933ford ,
the drive cards I have came out of a BP Discovery. the card is identified as follows: HB AMPLIFIER MOTION SCIENCE INC. SAN JOSE CA. REV.C the various identifiers on the board are UMR1 Rev.C If this helps let me know.
Paul

1933ford
10-08-2008, 10:39 AM
tenmetalman,
My servo drive boards were made by American msi corp. My motors are
also msi. I will see if those you have might work. Anyone upgading a tree millineium 3100 and not using the msi boards and electronics I will buy them.

Thanks

fastolds
01-08-2009, 09:47 PM
I have a running 1991 Millenium 3200 with delta 20 control. Has MSI drives, Yaskawa spindle drive, 2 new Baldor motors(cost $3500) and rebuilt spindle(cost $2000). $3000 for it complete.