PDA

View Full Version : KIA KIT60



cncmaintenance
09-18-2008, 03:22 PM
After relaoding parameters from pcmcia card the lathe stuck with
Operator message NO. 2004 Hyd. ALM
Has anyone ever had this alarm?

cncmaintenance
09-18-2008, 04:09 PM
AL-15 chuck clamp unfinished
This machine does not have a automatic chuck clamp or any detectors to tell if it is clamped.
Fanuc tech help tells me these are KIA operator messages.
Is there an english speaking KIA help line?

cncmaintenance
09-19-2008, 03:24 PM
The operator messages are embedded in the ladder logic, cross reference alarm numbers with addresses to find common uses

robotek
03-17-2009, 07:33 PM
My wife driving KIA. That's all I know about it:)

cnctexas
08-16-2009, 12:26 PM
AL-15 chuck clamp unfinished
This machine does not have a automatic chuck clamp or any detectors to tell if it is clamped.
Fanuc tech help tells me these are KIA operator messages.
Is there an english speaking KIA help line?

------------
You can call (201)489-2887, hit -0- and ask for Sam. If he can't help you, ask for the dealer in your area. We offer free phone support on Hyundai-Kia with Fanuc controls for customers in Texas.