View Full Version : Problem Postprocesor

milwin

09-13-2008, 11:20 AM

postprocessor to mate one of the surfCAM

MEFI CNC-859 (CNC 872 ITD)

HAIDENHAIN-TNC 310

If someone you have these postp. and you were so willing to share and so I was very grateful to you send mail to xboos@seznam.cz

Wanted is a long time:confused::confused:

sinderal

09-15-2008, 11:39 PM

I never met the TNC310 Control but 155, 426, 430 and 530!

Could you show me the difference?

In Surfcam\POSTLIB\Mpost\ , there are several post could be use for TNC155, 426 and 430! You also could modify by yourself.

You also could contact your local dealer to modify for you.

Email: support@3epraha.cz

http://www.3epraha.cz/surfcam/index.php

milwin

09-16-2008, 04:23 AM

Yes, in surfCAMu those processor what you wrote but the TNC 310 is not there. Yet we do not have this control system in the world if only we. Anybody would be so willing to help me create a postprocessor for HEIDENHAIN TNC 310

??

but I do not know how to the creation of the post-processor.

Hand-written program looks like this is a simple program but it would suffice as an example:

Program for HEIDENHAIN TNC 310

0 BEGIN PGM TvarL_10 MM

1 BLK FORM 0.1 Z X-20 Y+0 Z+0

2 BLK FORM 0.2 X+0 Y+116 Z+40.8

3 TOOL CALL 1 Z S800

4 L Z+50 F6000

5 L X-520 Y+140 M13

6 L Z+38.8

7 CALL LBL 1

8 L Z+36.8

9 CALL LBL 1

10 L Z+34.8

11 CALL LBL 1

12 L Z+32.8

13 CALL LBL 1

14 L Z+30.8

15 CALL LBL 1

16 L Z+28.8

17 CALL LBL 1

18 L Z+26.8

19 CALL LBL 1

20 L Z+24.8

21 CALL LBL 1

22 L Z+22.8

23 CALL LBL 1

24 L Z+20.8

25 CALL LBL 1

26 L Z+20

27 CALL LBL 2

28 L Z+18

29 CALL LBL 2

30 L Z+16

31 CALL LBL 2

32 L Z+14

33 CALL LBL 2

34 L Z+13

35 CALL LBL 2

36 L X-520 Y+71.5 F6000

37 L Z+12

38 L X+30 F200

39 L Z+15 F6000

40 L X-520 Y+83

41 L Z+11

42 L X+30 F200

43 L Z+15 F6000

44 L X-520 Y+94.5

45 L Z+10

46 L X+30 F200

47 L Z+15 F6000

48 L X-520 Y+106

49 L Z+9

50 L X+30 F200

51 L Z+15 F6000

52 L X-520 Y+117.5

53 L Z+8

54 L X+30 F200

55 L Z+50 F6000

56 L X-520 Y+12

57 L Z+39.8

58 L X+30 F200

59 L Z+90 F6000

60 L X+130 Y+330 M30

61 LBL 1

62 L X-520 Y+140 F6000

63 L Y+116

64 L X+30 F200

65 L Y+140 F6000

66 L X-520

67 L Y+78

68 L X+30 F200

69 L Y+140 F6000

70 L X-520

71 L Y+44.8

72 L X+30 F200

73 L Z+50 F6000

74 L X-520 Y+140

75 LBL 0

76 LBL 2

77 L X-520 Y+140 F6000

78 L Y+116

79 L X+30 F200

80 L Y+140 F6000

81 L X-520

82 L Y+87

83 L X+30 F200

84 L Y+140 F6000

85 L X-520

86 L Y+58

87 L X+30 F200

88 L Z+50 F6000

89 L X-520 Y+140

90 LBL 0

91 END PGM TvarL_10 MM

sinderal

09-16-2008, 05:15 AM

Please try the two post in surfcam\postlib\mpost\

Hei355c.m3 and Hei355s.m3 (w/ sub-program call)

Powered by vBulletin® Version 4.2.2 Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.