PDA

View Full Version : Need Help! KL-4030



bbrown2005
09-02-2008, 09:06 PM
i was wondering how to set microstep? if i have m1 0, m2 0 and m3 1 is this 1/8 step m1 1, m2 0 and m3 0 is this 1/64 step what micro step is best?

automationtechinc
09-03-2008, 11:07 AM
Current:

M5 0 0 0 0 1 1 1 1
M6 0 0 1 1 0 0 1 1
M7 0 1 0 1 0 1 0 1
Current 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3

MicroStep Resolution:

M1 1 0 1 0 1 0 1 0
M2 1 1 0 0 1 1 0 0
M3 1 1 1 1 0 0 0 0
Resolution 1 1/2 1/4 1/8 1/16 1/32 1/64

M1: 1 , M2: 1, M3: 0, Microstep: 1/8

http://www.kelinginc.net