View Full Version : Bernard Baud 2002 card

08-20-2008, 01:57 PM
Hello all,,,
Very new to the forum,, pleeease bear with me.

My reason:
I am currently using a driver card by Bernard Baud (BB2002) (French)
3 axis control rated max. 30v, running 3 off 5v motors 1.1amp/phase 1.8deg nema23 , does anyone out there use this same card? I need to work out the ballast resistors from power supply 24v 8amps

02-08-2011, 01:21 PM
hello est ce que tu peut me dir d'ou tu a confectionné la carte bb2002 moi j'ai que la bb2001
merci d'avance

02-09-2011, 04:39 AM
check doc. attached. it's in french. Layout is in scale1:1