PDA

View Full Version : Problem with FMB mini turbo 4200 on a DECO 20mm



JAYMAN
07-28-2008, 11:35 AM
Hi this is my first post. I have a FMB mini turbo 4200 on a DECO 20mm. All of a sudden the loader is flashing alarm 18 (Monitoring time for bar change has elapsed)? it won't clear? This is what I have done so far, swapped all input/output cards and syncro clutch from another loader and it still has the alarm. It will work in manual operation meaning it will go forward reverse. As soon as I close the main collet on the M/C the loader flashes 18, and if I open the collet the loader starts to feed like normal? this is very wierd never had this problem before. And FMB is now edge technologies and they no longer support this loader and no one over there know's anything about this.

cogsman1
07-29-2008, 07:39 AM
Sorry I don't have your answer, but I do have a contact for FMB.

Sales/Service Josef Filous fmbusa@aol.com
phone# 973-364-8000
fax# 973-364-8110

JAYMAN
07-29-2008, 05:40 PM
Sorry I don't have your answer, but I do have a contact for FMB.

Sales/Service Josef Filous fmbusa@aol.com
phone# 973-364-8000
fax# 973-364-8110



Thank you. I will give that # a try in the morning.

Don_at_Edge
11-06-2008, 04:19 PM
Jayman,

I am with the service department of Edge Technologies. We do provide support for the older FMB bar feeders as well as the current models.

Please feel free to call me if you are having problems with your FMB.

Don Feltz
Technical Services Manager
Edge Technologies
dfeltz@edgetechnologies.com
314-810-3955

PixMan
12-07-2008, 10:15 PM
Hi Jayman! :wave:

How's things (other than your bar feeder issue) at "that place"?

Miss you guys!

KM

BTW, the folks at Edge Technologies are EXCELLENT, even with the retirement of Adrian S. If you need help, I've got nothing but good things to say about Don & his crew.