View Full Version : Need Help! Techno mac200ds

07-24-2008, 12:40 AM
I have connect my Techno mac200ds with the PC win98
I got an runtime error 200 at 007A:0091 when run HPGL software in dos mode
Has anybody can fixed this problem .
Thank in advance.

09-03-2008, 12:52 AM
Get a new controller box, and use Mach 2 or 3 software. You could use the mac controller, but you need 12 volt step and direction signals for the mac. paralell port has 5 volt signals. the mac is a serial port interface with a 8032 microprocessor inside. Mach is way better than any of the old techno software. . bootup in dos not windows.