PDA

View Full Version : Need Help! Okuma LNS-10 OSP 3000L



David Russell
07-21-2008, 09:14 PM
Hi I have a Okuma LNS-10 OSP 3000L I am getting a 1011 and a 1013 alarm the 1011 is my x axis and 1013 is my z axis. any help would be greatful.

theokumaguy
07-22-2008, 11:57 AM
1010 is a servo alarm 1011 just means x (1010 alarm on first axis) and 1013 means z (3rd axis). Check the state of the LDU units and see if any alarms LED's are on. These LED's give you an idea on what the problem is.