PDA

View Full Version : Need Help! Okuma OSP5020L



MKATool
06-16-2008, 09:29 AM
I need some help transfering files from my control to my laptop. Any help would be greatly appreciated.

phx
06-20-2008, 01:38 PM
hi

easy way is moving over the Disk Drive.

skullworks
06-22-2008, 12:53 PM
hi

easy way is moving over the Disk Drive.

Most OSP 5020 (M or L) don't have a floppy drive. Those that do use a non IBM/DOS format so they can not be read by a PC without special software to mount the drive volume.

With the proper serial cable you can "punch" the program to "CN0:" (if I recall correctly.) Procomm for DOS or Preditor DNC can handle the file transfer.

OKUMA Tech
06-27-2008, 01:05 AM
here is the cable set up to transfer files through the cno: port