PDA

View Full Version : Where can I find this type of aluminum extrusion?



chozo
09-02-2004, 05:52 PM
Where can I purchase this type of extrusion? I need it for my design.
(I've seen it in different dimensions, but always based on a square shape, with channels on all sides)

http://www.rpgdesign.com/hosted/aluminum_extrusion.jpg

Thanks.

High Seas
09-02-2004, 06:16 PM
looks like 80/20 and if 1.5x3.0 inches its the 1530. They have a web site and a full pdf catalog available. You can sometimes find it on ebay I checked yesterday and there were a few pieces available. Hope that helps - Cheers - Jim
BTW I built my System1 and 2 out of it - see the Photo Gallery.

chozo
09-02-2004, 06:31 PM
Thanks!

Al_The_Man
09-02-2004, 07:27 PM
Item products also make extrusions, I believe they offer a more varied selection.
http://www.itemamerica.com/home.html
Al

chozo
09-02-2004, 08:02 PM
Thanks, although the website with the products is currently down.

dmgdesigns
09-03-2004, 08:20 AM
http://8020.net
http://www.tslots.com
http://www.misumiamerica.com/ Aluminum Frames
http://www.mcmaster.com/ search extrusion

I'm sure there are more. Hope this helps you.

jderou
09-03-2004, 09:11 AM
http://www.quikconnect.com/

traveler
09-03-2004, 09:47 AM
I found almost exactly the same extruded shape at the salvage yard. It came from a store-front. I used it for the gantry on my plasma table.Check with commerical glass installers and they may be able to guide you

my motto: never set a pace that you can't maintain

chozo
09-03-2004, 04:21 PM
Thanks everyone! Great responses.

80/20surplus
11-04-2004, 10:58 AM
80/20 Surplus does offer bars like this and listings are added practically every day. I work at 80/20 Surplus and we may be getting some of this in early next week. In the meantime, you can also check with 80/20 Inc. at the same address above as they stock this material.

Thanks,

Tim Cain
80/20 Surplus