PDA

View Full Version : Engraving - Carving Photographs



Tony Mac
05-14-2008, 06:36 PM
PhotoVCarve user and CNC machine builder Stefan Welschoff from CNC-Wood (http://www.cnc-wood.de/)in Germany carved this stunning 3D photograph using PhotoVCarve.

Please note that although this project looks superb, photo machining techniques will typically only work for relatively low (less than 1/8" / 3mm) 3D projects. 2D photographs / images do not typically include sufficient information to enable them to be machined higher / thicker.

Tony

bsimages
05-20-2008, 04:04 AM
Nice Tony,
Is that pine?

woody53
05-08-2011, 04:40 PM
PhotoVCarve user and CNC machine builder Stefan Welschoff from CNC-Wood (http://www.cnc-wood.de/)in Germany carved this stunning 3D photograph using PhotoVCarve.

Please note that although this project looks superb, photo machining techniques will typically only work for relatively low (less than 1/8" / 3mm) 3D projects. 2D photographs / images do not typically include sufficient information to enable them to be machined higher / thicker.

Tony

Just got PhotoVcarve, if I could do as good as this, I would be Very happy. Mine have no definition , did just what the tutorials say. Any Help ?