PDA

View Full Version : Problem hello Okuma Guys!



crish
05-05-2008, 08:22 PM
Hello everbody!I am new here,on this forum,and I hope I'll find some people who can help me solve some problems I have programming turning a part with a twin tool with h1=0.787 .How should look a program in this case for Okuma Multus 300 W?

lshingleton
05-09-2008, 09:26 AM
HI Crish where in Canada?
-i am in ontario

crish
05-09-2008, 07:19 PM
I am in Kitchener ,Ontario