PDA

View Full Version : Keling stepping driver



Mongkol
05-05-2008, 08:50 AM
Hi All,
I have KL-11078 stepping driver to control hybrid stepping motor at 8 wires.( 1200 Oz-in). I would like to know the power supply for this driver. I know it use at 110 VAC but I don't know what amps is compatible with this.Pls advise.


Mongkol

automationtechinc
05-13-2008, 02:51 PM
if you wire the motor as Bipolar Paralle, the rated Current is 6A, So you can set at 6A in your driver by DIP switch