PDA

View Full Version : Keling CNC Spindle



sergizmo
04-01-2008, 04:38 PM
Can someone at Keling please give me some info on the spindles now up on the site. This could include dimensions, power input, power output, RPM range, cost, etc...There is very limited info on the site, and the specs chart is blank. Thanks.

Serge

greenb_60097
04-01-2008, 05:45 PM
I think this is the same chineese spindle that Tigertec imports and you can also get them at HomeCNC, and they will probably give the better tech support if you call them. I saw one at the tigertec booth at a show, pretty neat, water cooled, I don't remember the specs, probably around a grand and close to 3 hp.

automationtechinc
10-12-2008, 06:46 PM
Hi Sir, we sold many Spindle and VFD to CNC router company as OEM. There are not many Hobby users yet. But they are very good Spindle and VFD, Very quite.
Check here
http://www.kelinginc.net/CNCSpindleandController.html

lgalla
10-30-2008, 12:52 AM
Hi Kelinginc,
On special order can you get higher HP spindles with 3 phase power?
Larry

automationtechinc
10-30-2008, 06:37 PM
Hi Kelinginc,
On special order can you get higher HP spindles with 3 phase power?
Larry

Ho many KW or Horse power?

lgalla
10-30-2008, 09:33 PM
Hi Keling.
5 or 7.5 Hp.In Canada my 3 phase power is 575 volts.I do not have a problem with US 480 volts as a transformer is cheap.
Thankyou
Larry

automationtechinc
10-31-2008, 10:40 PM
Hi Keling.
5 or 7.5 Hp.In Canada my 3 phase power is 575 volts.I do not have a problem with US 480 volts as a transformer is cheap.
Thankyou
Larry

See a email to support@kelinginc.net for detail

Pplug
11-09-2008, 09:09 PM
What type and rate pump do you use to cool the 2.2kw spindle?

automationtechinc
11-09-2008, 10:27 PM
What type and rate pump do you use to cool the 2.2kw spindle?

Flow Rate: about 2-2.5 L/min

Pplug
11-13-2008, 04:26 PM
My next question is, do you use water or oil as a coolant?

automationtechinc
11-13-2008, 06:04 PM
My next question is, do you use water or oil as a coolant?

use the water to cool

tgrandahl
12-17-2008, 03:41 PM
Are these spindles being sold on ebay the same as the Keling ones?

http://cgi.ebay.com/a-water-cooled-spindle-motor-2-2kw-without-VFD-inverter_W0QQitemZ250339537581QQihZ015QQcategoryZ78197QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

I know this has been discussed before in a different thread but there has not been any conclusion.

I emailed the seller for some more information, the listing is very vague. He responded telling me that the manual they have for the spindle is in Chinese and they are in the process of translating it.

If anyone has a copy of the manual in Chinese could you post it? I live with a chineese exchange student and he would be able to translate the information too.

Does anyone on this forum have any experience with one of these yet?