PDA

View Full Version : WTD: nested parts for Joes 2006 R2



zachjowi
03-03-2008, 11:39 AM
Does anyone have the parts nested on 4'x8' sheets already or anyother sizes of stock? It would be great if you did and shared it.

Thanks

joecnc2006
03-03-2008, 03:04 PM
I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.

Joe


http://www.cnczone.com/forums/attachment.php?attachmentid=54685&stc=1&d=1204574654
R2 nested.jpg

zachjowi
03-03-2008, 08:19 PM
I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.

Joe


http://www.cnczone.com/forums/attachment.php?attachmentid=54685&stc=1&d=1204574654
R2 nested.jpg

thank you. You are a good man

agguilar
01-28-2011, 07:13 PM
thank you joe