View Full Version : 3 axis controller from Mr. Doerr

02-22-2008, 11:26 AM
Look at this 3 axis controller from Mr Doerr. This is a pdf file from him ( Thank you)
he used our pakage
NEMA 34 Steppper Motors 3 Axis CNC Kit: $849

A:3 PCS KL8078, 80V, 7.8A

B: 3 PCS NEMA 34-906 oz-in Motors (KL34H295-43-8A (Single Shaft)

C: 1 PCS KL-6515, 65V/ 15A,Unregulated Power Supply 1000W,2
regulated outputs 5Vdc and 12Vdc at 1A

D:1 PCS C10 Breakout board, E-Stop or Limit Switch can be wired

03-07-2008, 02:21 PM
Here is the picture of the componets

03-07-2008, 05:12 PM
Just curious,

With the Keling drives, do you use a power supply(PS) that is between 4 times and 20 times the motor's voltage. (like the geckos)?

If you use that formula for getting a PS for the motors... The motors would need to be wired series to use the 65vdc PS.

Just curious,

Fred Doerr
03-08-2008, 11:10 AM
Hi Jack, I've got the wiring for series..........Thanks Fred