PDA

View Full Version : MCT5000 cnc tool grinder



FormtoolNZ
02-20-2008, 11:09 PM
Hi All, We have come across the MCT5000 CNC grinder. Has anyone here had any experiance on these and they a OK machine for grinding Step drills Flat spade drills and sharpening? And anything else we should knopw first.
Cheers All

cb1
02-21-2008, 04:22 PM
i have been cnc tool grinding for 12 yrs, and i have never heard of the
MTC5000.
i watched a video from the machine on you tube, and it was soooo
slow.
if you are buying used, spend some time on the machine first.
personaly, after watching the video, i would never look at the machine again.
if this is your first cnc grinder you should buy one that you can get lots of support. technical and applications.
good luck.