PDA

View Full Version : Making Custom O-Rings



NeoMoses
05-04-2003, 02:02 AM
If you've ever needed to make a custom O-ring and you don't have a splicing kit, simply cut the O-ring to size and use Super Glue to bond the ends together. It works really well for almost all types of rubber.

kong
05-04-2003, 08:29 AM
You into computer modding, Neo?
Looks like a waterblock in your AV.

HomeCNC
05-04-2003, 01:38 PM
Nice to hear this about O-rings. purchased a roll of O-ring stock and I did not know for sure how to join the ends.

NeoMoses
05-04-2003, 02:32 PM
Yep, that's a waterblock. I run a watercooled computer and love it. Don't you just love the flexibility of owning your own CNC?


Originally posted by kong
You into computer modding, Neo?
Looks like a waterblock in your AV.

Klox
05-09-2003, 11:20 AM
What's watercooled, the CPU.
Please tell me more as i am a complete idiot whenit comes to PC's.

Klox

kong
05-09-2003, 01:20 PM
Basically, you attatch the waterblock to the CPU instead of your heatsink/fan, then water is run through it, via a small radiator (like a car's heater matrix) which cools the water down again. There are several types of waterblocks, for the cpu, graphics card, and the northbridge. Mostly used by overclockers due to their better cooling capacity, they also be used to run a virtually silent pc.

Klox
05-13-2003, 11:07 AM
So if one hears a bubbling noise it's not the scuzzi drive but the PC overheating!!!!!!
Just joking :D
Tell me more, i'm fascinated......

Klox