PDA

View Full Version : OKUMA BOARD REPLACEMENT.



GPena
02-15-2008, 05:13 PM
Hi,

I am new with Okuma controllers with OPUS 5000II, and have a question. We need to replace one SVP board from our lathe, the model of the board mounted now is E4809-436-016-C and the one we want to use is E4809-016-D. Could it be a problem with this????

Thank you for your help.

GP.

philserveng
02-16-2008, 06:22 PM
As a former Okuma service engineer, I don't see a problem with your question. Electronic devices are normally backward compatible, as in this case.

GPena
02-18-2008, 11:19 AM
Ok. We will replace it then.

Thank you very much.

sansgp
10-02-2008, 01:49 PM
Hi,

I am in search of parts for an OKUMA drive, to repair. Can you pls help?

May email to: nodu.technicalservices@gmail.com . I'll send information on my requirement.

Thanks,
Santhosh
Nodu Technical Services
Singapore

spindleman
10-02-2008, 02:35 PM
I am sorry, I'm new to this and don't kmow how to post so I thought I'd try this. Does anyone know the voltage for an Okuma HF 1007 wheelhead spindle?