PDA

View Full Version : Hello from Ireland



MachineEd
02-13-2008, 02:06 PM
Hi there,
Brand new to this and looks like this is the ultimate machine for work I need to do. I want a machine (Build it myself ) that will drill Fiberglass board (1/8th) for eyelet connecters, Drill or rout holes on three sides of a steel box (c 1.6mm) and engrave lettering on a brass plate sized about 3 to 6 mm (1/8 to 1/4 ) This is for a Valve Guitar Amplifier I want to create.

Any directions on what to read as a preliminary would be greatly appreciated.
Kind regards,
Ed

vcooney
02-14-2008, 05:59 AM
You should check out the Widgetmaster threads. The mini router is a great machine to pick up or even model your build after.

http://www.cnczone.com/forums/showthread.php?t=21872&highlight=widgetmaster

Vince