PDA

View Full Version : Can anyone help with sheetcam post processor?



twooten
01-25-2008, 07:24 PM
Hi, I'm trying to determine which post processor I need for my plasma table. I'm using sheetcam, great product by the way. Following is a copy and paste of a simple NC file that I know works.

G70

G91

G00X2.500Y46.750

G41M15

F110.0

G01X0.000Y-0.500

G01X0.000Y-45.750

G01X-2.000Y0.000

G01X0.000Y45.750

G01X2.000Y0.000

G01X0.250Y0.000

M16G40

G00X2.500Y0.500

G41M15

G01X0.000Y-0.500

G01X0.000Y-45.750

G01X-2.000Y0.000

G01X0.000Y45.750

G01X2.000Y0.000

G01X0.250Y0.000

M16G40

G00X-5.500Y241.750

M00

G00X0.000Y-288.000

M02

The table has the following specs.

Koike - D7 Cutting Tips
Coordinate Drive Control System
Type: LYNX
System: 6D55181G04
Control/Amplifier: 6D55179G03

Thanks,

Tim

twooten
01-27-2008, 03:36 PM
Anybody?

Thanks

Bubba
01-27-2008, 03:47 PM
twooten,
Les had posted in his yahoo group that he was going to be out of town for a few days. Probably isn't back yet and he is your best bet to help.

locost_cam
01-28-2008, 06:58 AM
Sorry for the delay. I have been on holiday. I've emailed you a post to try.

GeekSquad
03-30-2015, 01:48 PM
I also need a Post for this controller. Sorry to open an old thread but any help would be awesome.