PDA

View Full Version : No Power Help



toby51
01-22-2008, 03:22 PM
Hi,I have a desktop router, i was engraving,when the spindle stopped.I reset the machine it started for a few mins,then cut out again with E.009 on the LED display.
Now it will not power up at all,but when the run button is pressed a small light shows it is running,but nothing.
On the inverter it has 100H-1.5K.
Could the trouble be in that.
Thanks
Mike

pike88
02-05-2008, 11:58 PM
Mike, Check if the ground wire came loose.