View Full Version : Enclosure source

01-16-2008, 03:19 AM
Hi all,

I recently purchased a Xylotex controller; however, I'm wanting to add some more goodies (power outlet, e-stop, LEDs, etc.). I'm going to need a slightly larger enclosure; therefore, I'm hoping some of you have a good source for a nice aluminum, preferably anodized (wanting to laser it) electronics enclosure.

Please let me know if you have a good source or what you'd recommend.


Independent CNC
01-16-2008, 07:46 AM
You should be able to find anything you want here http://www.rittal.com/

Independent CNC Programmer