PDA

View Full Version : Second offset



maximusek
01-14-2008, 02:08 PM
I have two machines: nakamura tw-10 and swiss Maier 20ML. I want to drill two holes using the same drill but I want to use two offsets. In tw-10 it is easy: in the program I call tool T0707 (tool and offset) then drill first hole, then call T0717 and drill second hole. One tool, two different offsets - no problem. I was trying to do the same in Maier but machine just stopped without any alarm message. How can I use second offset for the same tool?? Thank U for help