PDA

View Full Version : captain l470m post



kazmir44
01-11-2008, 11:23 AM
Is there anyone out there who has a working post for an okuma captain l470m with live milling?
Or, if you have one of these, what software are you using to program it?
I am using mastercam 9 and x2.

kazmir44
01-25-2008, 12:00 AM
65 views and no replies:confused:
is there anyone out there with an okuma lathe with live milling?
there's got to be someone out there.
I'm not asking for someone to give me a post. I just want to know if one exists.
Or what cam system other people are using to program this type of machine.
I'm also not interested in admac.
If there is anyone out there willing to share some knowledge, please reply.

MAZACHS
02-07-2008, 07:43 AM
HELLO,
I HAVE A POST FOR CAPTAIN L470M FOR MASTERCAM X2 BUT IT'S NOT AT THE TOP.
SOME MODIFICATIONS NEEDS TO BE DONE.

MAYBE YOUR'S COULD BE BETTER.

I WOULD LIKE TO KNOW IF YOU KNOW HOW MAKE SPRING CUT FOR THREAD. IN MASTERCAM, I MAKE IT BUT NOT IN MY G-CODE.

THANKS !