View Full Version : Contract foam cutting needed

12-19-2007, 11:11 AM
Rather than build my own machine, I'm looking for someone here with a machine to do the foam cutting I need on a contract basis. I will supply the material. I will pay very well for work done I need. One requirement is that you use NiCr wire 3-4' in length. Contact me for details.

12-19-2007, 01:41 PM
I sent you a PM with my contact information. Contact me and we can discuss the details.


03-03-2008, 09:51 AM
We (my company) are just now assembling our first cnc 3d foam cutting machine. We do everything foam in Jacksonville ,Florida. We are an 85,000 sq. ft. facility that will now have 3d in our repitoire. I hope to be up and running soon and able to be of help.

03-27-2008, 05:07 PM
Please send for me picture you want to cut
to ntn52@hotmail.com
my location: Westminster , Ca 93683
my machine can cut 4'x6' thick 24" (2D only)
Nguyen Nguyen

04-01-2008, 01:05 PM
Please delete this thread if possible.