PDA

View Full Version : my demo cnc



costy35
12-16-2007, 02:38 PM
My cnc follow dcc motors ,and couple infrared from a mouse.Nice and simple!
http://www.youtube.com/watch?v=ulXIAf7PQqY
Any comments?

lovesakhi
12-24-2007, 07:34 AM
Hello costy,
your demo was great and hope u can give more details
in later threads like plans and 2313 code etc
regards
dr.sanjeevi rao s

costy35
12-25-2007, 07:24 PM
Srry but not speak and understand english bene :(
My cnc details...http://www.youtube.com/watch?v=8sNPNIzcO_g
And source code

emilcnc
07-21-2008, 04:27 AM
please add your schematics :) thanks

Emil

costy35
09-30-2014, 05:55 PM
my new foam machine

https://www.youtube.com/watch?v=aIowblAp84w

costy35
02-20-2015, 03:54 AM
Now I modified little gbrl code from arduino from here https://github.com/grbl/grbl (file stepper.c) and now can command directly my 5v unipolar steppers motors , but all functions is disables...work only arduino out 4,5,6,7 axe x and 8,9,10,11 axe y.
See my recent video...

http://youtu.be/5amsLfg5WUI

costy35
02-20-2015, 05:28 AM
http://youtu.be/gwifi2o-HYk?list=UUgZyZAxu2SkYqpyaNQ018Wg