View Full Version : Deckel manuals DC70

12-07-2007, 10:12 AM
We just had a Deckel DC70 removed from our facility and I still have the manuals here. If anyone has a need for these manuals or would like additional info concerning what literature I have available let me know. If you can use them all I ask is that you provide shipping/handling and I will be more than glad to send them to you.

12-13-2007, 10:36 AM

I might be interested in those manuals, is DC70 similar to DC40?
I am interested in the sequence for loading the parameters for NC and PLC, for
a Deckel DC40, with Siemens M8.
Your help would be appreciated,

Best Regards,

12-13-2007, 01:19 PM
I'm not sure of the similarities of the DC 70 vs. DC 40. This was an old machine that has not been in operation for quite some time so I didnt have an opportunity to do much operational or programming studies on it. I will attempt to cross reference these 2 machines to find out if they are indeed compatible. As far as loading parameters I will also try to pinpoint any machine specific techniques and/or procedures that I may know of to assist you.

Best regards,

Johnny Outlaw

12-13-2007, 02:01 PM
Hi Johnny,

Thanks for your quick reply.
Yes, these are very old machines, DC40 is a double pallet machine.
I've heard that it has special sequence to call the parameters up from non-volatile memory inside, but i am not able to find such information! I would appreciate any help here,

Thank you,