PDA

View Full Version : CNC Programming Handbook, 3rd Edition



MetLHead
12-02-2007, 12:20 PM
Peter Smid has just released the third edition of his very popular book "CNC Programming Handbook". Among the list of new additions is the inclusion of NCPlot v2! The book's CD contains the 15 day trial version of NCPlot, so you can try the program examples as you read the book.

Here's a link to the book at Industrial Press:

http://www.industrialpress.com/en/BookDetails/tabid/54/CatalogItemID/443/Default.aspx

And at Amazon.com:

http://www.amazon.com/CNC-Programming-Handbook-Peter-Smid/dp/0831133473

Thanks,
Scott

rippersoft
12-02-2007, 06:25 PM
Way to go! Now your famous.

RipperSoftware.

MetLHead
12-02-2007, 09:53 PM
Well, not famous.... but very exciting anyway!

Scott

single phase
12-03-2007, 01:37 PM
Congratulations! You deserve this big time. :cheers:

cyclestart
12-03-2007, 11:24 PM
Congratulations! I've always wanted that book. This addition makes it irresistable.