PDA

View Full Version : NOMURRA HELP



BAD DOG
11-14-2007, 06:07 PM
GOT IN A NUMURRA NN20

SIDE LIVE TOOLS ARE OFF CENTER (Y AXIS) HAD TO PUT .280 IN THE OFFSET IN ORDER TO LINE UP ON CENTER.

SOMETIMES THE PROGRAM WORKS AND OTHER TIMES IT ALARMS #412
NC OP ERROR

BAD DOG

chunkymonkey
11-15-2007, 01:52 PM
WHY ARE YOU OFF .280? HAVE YOU TRIED G28V0? THIS SHOULD SEND IT HOME. THEN YOU CAN TRAM YOUR MACHINE IN.

chunkymonkey
11-15-2007, 02:14 PM
ALSO ARE USING A UB B2 B3...ETC???

BAD DOG
11-15-2007, 03:32 PM
SERVICE MAN HAD TO GO INTO PARAM. AND SET A NEW ZERO POSITION.

TURNS OUT THE MACHINE DOESN'T LIKE HAVING THAT LARGE AN OFFSET

WORKS FINE NOW.

THANKS

BAD DOG