PDA

View Full Version : to cheap for a camcorder



SWPM
11-13-2007, 06:00 PM
I just finihsed the first part of some 15-5 stainless roughing. And thought I would post some pics


*********New*************
Runtime 3hr:30min
(1) carbide .750" E/M .030 radius for entire operation
using 3 axis true-mill with 25 deg engagment angle
spindle speed S 2450 Feed F60.0 1.5" roughing depth
***********************

*********Old************
Runtime 9hr
2.0 face mill and countless inserts

SWPM
11-13-2007, 06:02 PM
more pics

DSL PWR
11-13-2007, 11:54 PM
What kind of endmill is that?

SWPM
11-14-2007, 09:15 AM
It is a 4 flute Promax series 191 with ALtin coated with a .030" radius.
Half the flute is a rougher and the other half is a finish.

They are relatively cheap also

http://promaxtools.com/