PDA

View Full Version : New Joe 2006 Build, TX



darkfred
10-05-2007, 11:04 AM
I have been lurking in this forum for a few months.
I just ordered my Joe2006 kit from Joe yesterday. (Hi Joe this is George)

I have completed ordering all my hardware $286.04 including a box of limit switches from ebay. Thanks for the bolt depot part list Gary it saved me a ton of time. (http://www.cnczone.com/forums/showthread.php?t=32324&page=2 is the link for those who might have missed it)

I also ordered a home foundry kit from another source which should give me the ability to cast aluminum parts when I have the joe2006 as a mold making machine!!! Some of you might be interested in this so I will give some descriptions of it as well.

I will be putting up pictures as the packages arrive and I go to work.

If any of you are considering doing this, Joe has been incredibly helpful, he answered over 10 of my emails. I feel kinda bad for bugging him so much. But it gave me the guts to start.

Regards,
George

PS: I am going to have a ton of extra hardware, skate bearings and even a few limit switches if someone wants to take them off my hands for their own build.

darkfred
10-09-2007, 11:10 PM
My Bolt depot order has arrived. I also got 2 storage cases.

Thats a lot of bolts.

http://gallery.bludgeon.org/d/17194-1/bolts-arrive+1.jpg
http://gallery.bludgeon.org/d/17209-2/bolts-arrive+5.jpg
http://gallery.bludgeon.org/d/17203-2/bolts-arrive+3.jpg

TCGliderguy
10-10-2007, 06:07 PM
Good idea for the storage boxes..... I should have browsed around BoltDepot.com a bit more before I placed my order...

I'm glad to see that you have a long tailed, Quality Control manager similar to mine..... :-)

-Taylor