PDA

View Full Version : Simens AC servo, VFD Spindle drive?



mikec8100
09-25-2007, 08:41 PM
Hi there, i am looking at buying a used Simens 1 FT5066-1AF71-4ABO AC 3 phase servo to use as a spindle motor on a mill drill. Just want to know if a normal VFD can drive this motor, not for positioning. I have a SEW Eurodrive Movitrac 0.37kW/0.5HP VFD Type - MC07A004-2B1-4-00 that i would like to use.


Thanks for your help

Mike Christiasnen

Al_The_Man
09-25-2007, 08:54 PM
If it is a P.M. servo then you may have a problem, if an induction motor then it should work if the corrent voltage and HP.
Al.

mikec8100
09-25-2007, 09:30 PM
yea she is a PM servo. Thanks for that Al, you truly are the Man!