PDA

View Full Version : South East Texas - PracticalCNC Mentor



Sam A
09-10-2007, 11:30 AM
Anyone in SE Texas that wouldn't mind showing me their use of the Practical CNC?

Tks in advance

Sam

Sprint 77
04-12-2009, 07:20 PM
I am in Gladewater Texas I may not be a mentor yet but between the two heads we might could get some questions answered. I am a programmer and designer now use Solidworks '09 Autocad '06 Running Gibscam '07

Sam A
04-12-2009, 07:25 PM
Sprint 77,

Thanks for the response. I have learned a lot since I posted the request for help. I am doning 2D and 3D design and CNC work.

If there is anything I can help you with let me know. I use BobCad for my design work.

Sam

Sprint 77
04-12-2009, 07:34 PM
I am needing Mach 3 help mostly and of course some hard parts to finish one conversion

Sam A
04-12-2009, 07:39 PM
I use WinCNC with BobCad and the Practical CNC router. I have been thinking about looking at Mach 3 to get away from the proprietary board that WinCNC uses.

What kind of table do you have?

Sam

Sprint 77
04-12-2009, 07:57 PM
I am running a mini lathe and a 3n1 lathe mill Shoptask not got into routers yet